981 Series Right Angle D-Sub Backshell

Name: NorComp
Address: 3810 Shutterfly Rd #200, Charlotte, NC, 28217, US
Telephone: (704) 424-5448

Right Angle D-Sub Backshell | Ethernet 90° Entry available in:
- Standard (9 pin, 15 pin, 25 pin) or High Density (15 pin, 26 pin, 44 pin)
Available in die cast for over 70 dB shielding.
Easy backshell assembly reduces manufacturing cost.
Non-conductive grommet/strain relief supplied to enhance shielding and provide proper strain relief.
Slide locks and posts must be purchased separately.
(See Hardware Section)
Search here for a full range of right angle d-sub connectors

Assembly Instructions

Internal Dimensions

Material Declarations:

Video:

Ethernet Right Angle D-Sub Backshell

Filter

Position

Description

Position	Part #	Material	Description
9 Kit (15 H.D.)	981-009-030R121 Order Samples Check Distributor Stock	Die Cast	Right Angle
15 Kit (26 H.D.)	981-015-030R121 Order Samples Check Distributor Stock	Die Cast	Right Angle
25 Kit (44 H.D.)	981-025-030R121 Order Samples Check Distributor Stock	Die Cast	Right Angle
9 Kit (15 H.D.)	981-009-130R121 Order Samples Check Distributor Stock	Die Cast	Right Angle with Thumbscrews
15 Kit (26 H.D.)	981-015-130R121 Order Samples Check Distributor Stock	Die Cast	Right Angle with Thumbscrews
25 Kit (44 H.D.)	981-025-130R121 Order Samples Check Distributor Stock	Die Cast	Right Angle with Thumbscrews

25 Kit (44 H.D.)

981-025-033R121

Non-Conductive Grommets	160-000-YYYR000	Must be Purchased Separately
Slide Lock Posts	160-000-005R031	Must be Purchased Separately
Slide Lock For 9 Position	160-009-002R031	Must be Purchased Separately
Slide Lock For 15 Position	160-015-003R031	Must be Purchased Separately
Slide Lock For 25 Position	160-025-004R031	Must be Purchased Separately
Slide Lock For 37 Position	160-037-005R031	Must be Purchased Separately
Slide Lock Assembly Guide	N/A	Assembly Guide